dual-in-line slotted headers solder tail and wrapost open frame www.mill-max.com 516-922-6000 38 series 160, 162, 163 quantity per tube a b c total number of pins specify plating code xx= 10 90 pin plating 10 ? au 200 ? sn/pb ordering information solder tail 2 level wrapost 3 level wrapost l = .370 l = .510 10 0.5 0.2 0.3 41 160-xx-210-00-001 162-xx-210-00-001 163-xx-210-00-001 4 0.2 0.3 0.4 102 160-xx-304-00-001 162-xx-304-00-001 163-xx-304-00-001 6 0.3 0.3 0.4 67 160-xx-306-00-001 162-xx-306-00-001 163-xx-306-00-001 8 0.4 0.3 0.4 50 160-xx-308-00-001 162-xx-308-00-001 163-xx-308-00-001 10 0.5 0.3 0.4 40 160-xx-310-00-001 162-xx-310-00-001 163-xx-310-00-001 14 0.7 0.3 0.4 28 160-xx-314-00-001 162-xx-314-00-001 163-xx-314-00-001 16 0.8 0.3 0.4 25 160-xx-316-00-001 162-xx-316-00-001 163-xx-316-00-001 18 0.9 0.3 0.4 22 160-xx-318-00-001 162-xx-318-00-001 163-xx-318-00-001 20 1.0 0.3 0.4 20 160-xx-320-00-001 162-xx-320-00-001 163-xx-320-00-001 22 1.0 0.3 0.4 18 160-xx-322-00-001 162-xx-322-00-001 163-xx-322-00-001 24 1.2 0.3 0.4 16 160-xx-324-00-001 162-xx-324-00-001 163-xx-324-00-001 28 1.4 0.3 0.4 14 160-xx-328-00-001 162-xx-328-00-001 163-xx-328-00-001 20 1.0 0.4 0.5 20 160-xx-420-00-001 162-xx-420-00-001 163-xx-420-00-001 22 1.1 0.4 0.5 18 160-xx-422-00-001 162-xx-422-00-001 163-xx-422-00-001 24 1.2 0.4 0.5 16 160-xx-424-00-001 162-xx-424-00-001 163-xx-424-00-001 28 1.4 0.4 0.5 14 160-xx-428-00-001 162-xx-428-00-001 163-xx-428-00-001 32 1.6 0.4 0.5 12 160-xx-432-00-001 162-xx-432-00-001 163-xx-432-00-001 24 1.2 0.6 0.7 16 160-xx-624-00-001 162-xx-624-00-001 163-xx-624-00-001 28 1.4 0.6 0.7 14 160-xx-628-00-001 162-xx-628-00-001 163-xx-628-00-001 32 1.6 0.6 0.7 12 160-xx-632-00-001 162-xx-632-00-001 163-xx-632-00-001 36 1.8 0.6 0.7 11 160-xx-636-00-001 162-xx-636-00-001 163-xx-636-00-001 40 2.0 0.6 0.7 10 160-xx-640-00-001 162-xx-640-00-001 163-xx-640-00-001 42 2.1 0.6 0.7 9 160-xx-642-00-001 162-xx-642-00-001 163-xx-642-00-001 48 2.4 0.6 0.7 8 160-xx-648-00-001 162-xx-648-00-001 163-xx-648-00-001 50 2.5 0.6 0.7 8 160-xx-650-00-001 162-xx-650-00-001 163-xx-650-00-001 52 2.6 0.6 0.7 7 160-xx-652-00-001 162-xx-652-00-001 163-xx-652-00-001 50 2.5 0.9 1.0 8 160-xx-950-00-001 162-xx-950-00-001 163-xx-950-00-001 52 2.6 0.9 1.0 7 160-xx-952-00-001 162-xx-952-00-001 163-xx-952-00-001 64 3.2 0.9 1.0 6 160-xx-964-00-001 162-xx-964-00-001 163-xx-964-00-001 ? series 160, 162, 163 dil headers are equipped with slotted heads to accept wires or component leads. ? terminations are pluggable .018? diameter solder tails (m-m# 0282), see page 174 for details; or two-level wraposts, (m-m# 1106) see page 185 for details.
|